User Tools

Site Tools


v050:userguide

User Guide for version 0.5.0

Release notes, reporting bugs

Installation

Sample models

For a quick start we recommend experimenting with the sample models.

  • Download and unzip the sample models.
  • Import them into your Eclipse workspace (File / Import / General / Existing projects into workspace).
  • Clean and build the projects (Project / Clean…).

Sample models are implemented using either XtxtUML syntax (see the source packages <name of example>.x.model) or JtxtUML syntax (see the source packages <name of example>.j.model), or both. In addition, the sample models are accompanied with diagram descriptions (see the Java classes inheriting from the ClassDiagram or StateMachineDiagram type).

We suggest reading the Generating diagrams and the Running and debugging models sections as the next steps of experimenting with the sample models.

Creating own models

New txtUML project

txtUML models should be placed in txtUML projects. A new txtUML project can be created by selecting File / New project… / txtUML / txtUML Project and setting the project name.

By default, the project will be created in the current workspace. In order to override this, uncheck the Use default location checkbox and select a location for the new project.

New txtUML model

Select File / New / Other… / txtUML / txtUML Model.

Select a Source folder from an existing project for the new model. Select an existing Package from that folder or type a new Package name. Type a Name for the new model.

Select the syntax of the new model:

  • XtxtUML for custom modelling syntax.
  • JtxtUML for Java syntax.

Both XtxtUML and JtxtUML models can be connected with Java code, can be run and debugged, and used as a source for Papyrus UML model generation.

A txtUML model is a package with

  • either a package-info.java file (in case of JtxtUML), where the package has an annotation of the form @Model(“ModelName”)1) annotation,
  • or a package-info.xtxtuml file (in case of XtxtUML), which has a model declaration of the form model-package example.x.model as “ModelName”;.

All files in this package (and its subpackages) are part of the model. The wizard described above creates one of these files depending on the XtxtUML/JtxtUML selection.

New model elements

For XtxtUML syntax, select File / New / Other… / txtUML / XtxtUML File. Fill in the source folder and package to place the new source file in, then enter a file name. You can also choose between the two possible extensions: .xtxtuml or .txtuml.

For JtxtUML syntax, select File / New / Class to create a new Java class.

See the Language Guide for the syntax of the different model elements in JtxtUML and XtxtUML.

Modeling Language

See the Language Guide to study the txtUML language both in Java syntax (JtxtUML) and in custom syntax (XtxtUML). In case of JtxtUML, the JavaDoc of the API can also be used.

Generating diagrams

It is possible to generate EMF-UML2 models together with Papyrus diagrams from txtUML models. Currently class and state machine diagrams can be generated. Content and layout of the class diagrams and flat state machine diagrams can be defined by textual diagram descriptions. (Support for hierarchical diagrams is coming in a later release.)

The following simple example assumes classes A, B, C and D in the model. We create a class diagram where classes A, B and C are in a row, and class D is below B. Diagram definitions can be written using a Java API. See the Diagram Language Guide for detailed description.

Our example diagram can be defined as follows:

public class ExampleDiagram extends ClassDiagram {
  @Row({A.class, B.class, C.class})
  @Below(val = D.class, from = B.class)
  class ExampleLayout extends Layout {}
}

In order to generate diagrams, from the menu select txtUML / Generate diagrams from txtUML.

Fill in the name of the project containing the txtUML model, then the fully qualified name of the model. Using the Add txtUML diagram description button, you can add as many diagram descriptions as needed. In our example, there is only one. The fully qualified name of the Java class representing the diagram definition needs to be filled in.

When clicking Finish, a Papyrus model is generated with the following class diagram:

Diagram language

See the Diagram Language Guide for detailed description of the diagram language of txtUML.

Running and debugging models

The following hold both for XtxtUML and JtxtUML.

Switch to Java or Debug perspective and create a new run/debug configuration. Use Java Application type if you only want to run or debug the model only in text. Use txtUML Application type if state machine animation is required as well.

Breakpoints can be created and managed the same way as for Java programs. The standard debug controls (stop, pause, resume, step, step-into) work as usual.

The variable view can show the current signal, current state, associations and the attribute values of the actual object.

State machine animation

txtUML can animate state machine diagrams generated by the txtUML visualization process. See the Generating diagrams section. Make sure that the run/debug configuration is of txtUML Application type.

Open the generated Papyrus diagram and start the model either in run or in debug mode. The current state and currently executed transition gets highlighted.

For each state machine diagram, the state changes of the first activated object of the corresponding type will be highlighted. An expected later improvement will make it possible to select the object to be animated during the debug session.

Compilation to C++

The C++ model compiler can be reached by selecting the txtUML / Generate C++ code from txtUML menu.

The Eclipse project and the package that contains the model must be specified. The runtime library contains only pre-written .cpp files so they can be used for other generated models too.

The txtUML deployment configuration is a description of how the object instances will be distributed into different threads. The deployment configuration is a special class which is derived from the Configuration base class. The model classes can be grouped together and these groups can be configured as described below. The events that arrive for classes which belong to the same group will be served by a configured thread pool.

You can group by the help of Group annotation which contains the following configuration options:

  • contains: You can enumerate the classes which belong to this group.
  • constant: It determines how many threads will be regardless of the number of object instances. It must be a natural number. Its default value is 1.
  • gradient: It determines how many threads will be created (in addition to the number of constant threads) depending on the number of objects. It represents a linear coefficient, that is, the number of additionally created threads is gradient ⋅ n, where n is the number of created objects. It can be a real number between 0.0 and 1.0. Its default value is 0.
  • max: It determines how many threads will be created at most. It must be a natural number. Its default value is determined by the value of constant.

If there are classes with no groups aligned to them, a default implicit group will be created which contains these classes. It will be configured with the default values shown above.

Examples:

class DefaultConfiguration extends Configuration {}

This means that all of the classes will be grouped in the default group.

@Group(contains = {A.class, B.class}, max = 10, constant = 2, gradient = 0.5)
@Group(contains = {C.class})
class ExampleConfiguration extends Configuration {}

This means that instances of classes A and B are served by the same thread pool, which contains two constant threads plus one for every 2 A or B instances created, but no more than 10. Instances of class C are served by another thread pool and it contains only one thread (according to the default values).

We suggest reviewing the deployment configurations in the demo projects.

The generated C++ code is saved in the cpp-gen folder of the selected project. Note that you might have to refresh the folder so that the newly generated files become visible in Eclipse.

CMake support:

You can compile the generated files with any C++ compiler manually but we suggest using the generated CMakeLists file to create native “make files” that can be used in the compiler environment of your choice. CMake is available from https://cmake.org/. It is recommended to create a new folder next to the generated files, where the build environment should be created. The compilation can be performed by the following command:

cmake -G <environment> -D CMAKE_BUILD_TYPE=<type> <path>

Where the parameters mean the following:

  • <environment>: The chosen build environment. You can use the cmake --help command to list the possible build environments.
  • <type>: The type of the build. Can be Debug or Release.
  • <path>: The relative path to the generated CMakeLists file.

A concrete example:

cmake -G "MinGW Makefiles" -D CMAKE_BUILD_TYPE=Release ..
1) Fully qualified name: hu.elte.txtuml.api.model.Model
v050/userguide.txt · Last modified: 2016/08/16 00:18 by deva